Why Did Matt Kenney Leaves Fine Woodworking

?

In a move that shocked the woodworking community, Fine Woodworking magazine editor Matt Kenney resigned from his post on March 3, 2014. Kenney, who had been with the magazine for over a decade, gave no explanation for his departure.

Some in the woodworking community speculated that Kenney’s departure was due to disagreements with the magazine’s new ownership, Highland Woodworking. Highland purchased Fine Woodworking from its previous owner, the Taunton Press, in late 2013.

Others speculated that Kenney’s departure may have been due to health reasons. Kenney had been battling cancer since 2012.



However, Kenney has not commented on the reasons for his departure.

Kenney’s departure leaves a large hole in the woodworking community. He was a highly respected editor and writer, and his contributions to Fine Woodworking were invaluable.

The magazine has not announced who will be replacing Kenney.

Complete Guide To Woodworking

Woodworking is a fascinating and enjoyable hobby that can be pursued by people of all ages. Whether you are a beginner or a seasoned pro, there is always something new to learn about this amazing hobby. In this article, we will discuss the basics of woodworking and provide some tips to help you get started.

The first thing you need to know about woodworking is the basic terminology. In woodworking, a ‘joint’ is where two pieces of wood are attached together. There are several different types of joints, each with its own strengths and weaknesses. The most common types of joints are the butt joint, the dovetail joint, the mortise and tenon joint, and the rabbet joint.

The second thing you need to know about woodworking is the different types of wood. The most common types of wood used in woodworking are oak, maple, cherry, and walnut. However, there are many other types of wood available, including pine, cedar, and birch. Each type of wood has its own unique characteristics, so you will need to choose the type of wood that best suits your needs.

The third thing you need to know about woodworking is the different tools and equipment you will need to get started. The most basic tools you will need are a hammer, a screwdriver, a tape measure, and a saw. However, there are many other tools and equipment available, including chisels, saws, routers, and sanders. It is important to choose the right tools and equipment for your needs, so be sure to do your research before purchasing anything.

The fourth thing you need to know about woodworking is the different techniques you can use to create your projects. The most common techniques are carving, turning, and joinery. Carving involves using a chisel to sculpt the wood into the desired shape. Turning involves using a lathe to create cylindrical shapes from the wood. Joinery involves using various joints to create a sturdy piece of furniture or other project.

The fifth thing you need to know about woodworking is how to safely use the tools and equipment. It is important to read the instructions that come with the tools and equipment, and to practice using them safely before using them for the first time. Be sure to wear safety goggles and a dust mask when using power tools, and always use caution when using sharp tools.

The sixth thing you need to know about woodworking is how to stain and finish the wood. There are many different types of stains and finishes available, so you will need to choose the ones that best suit your needs. Be sure to test the stains and finishes on a small piece of wood before applying them to your project, to ensure that they are the right color and sheen.

The seventh thing you need to know about woodworking is how to assemble the project. This can vary depending on the project you are working on, but typically you will need to attach the joints using a combination of screws, nails, and glue. Be sure to use the right type of fasteners for the type of wood you are using, and make sure the joints are properly aligned before attaching them.

READ
How to Install a Side Vise on a Woodworking Bench

The eighth thing you need to know about woodworking is how to take care of your tools and equipment. Be sure to clean the tools and equipment after use, and store them in a safe place when not in use. This will help to ensure that the tools and equipment last for many years.

The ninth thing you need to know about woodworking is how to troubleshoot common problems. If the project is not coming out the way you want it to, there are several things you can do to troubleshoot the problem. Be sure to check the joints to make sure they are properly aligned, and make sure the screws and nails are tight. If the problem persists, you may need to adjust the measurements or try a different type of joint.

The tenth thing you need to know about woodworking is how to finish the project. Be sure to sand the project smooth before applying the final coat of finish. This will help to ensure a smooth, polished finish.



Woodworking is a fascinating and enjoyable hobby that can be pursued by people of all ages. Whether you are a beginner or a seasoned pro, there is always something new to learn about this amazing hobby. In this article, we have discussed the basics of woodworking and provided some tips to help you get started.

Woodworking Shop Stool

A shop stool is a very handy tool to have in any woodworking shop. It can be used for a variety of tasks, such as reaching high shelves, or as a seat when you need to take a break. A good shop stool should be sturdy, and have a comfortable seat.

There are many different types of shop stools on the market, but I prefer the ones that have a back and a footrest. This type of stool is more comfortable to sit on for long periods of time, and it also helps to keep you from sliding off the stool.

There are several things to consider when purchasing a shop stool. The first is the height. You want to make sure that the stool is tall enough so that you can comfortably work at the bench or table. The seat should also be wide enough so that you can sit comfortably, with both feet flat on the floor.

The next thing to consider is the weight capacity. Make sure the stool can support your weight, especially if you plan to use it as a seat.

Finally, consider the price. Shop stools can range in price from around $20 to $200 or more. The higher priced stools are typically made from better quality materials, and will last longer.

If you’re looking for a good quality shop stool, I recommend the Grizzly G stool. It’s a sturdy stool that comes with a comfortable padded seat, and it has a weight capacity of 300 pounds. The Grizzly G stool is also adjustable, so you can set the height to fit your needs. It sells for around $60.

Biscuit Cutter For Woodworking

A biscuit cutter is a small, handheld tool that is used to cut circular slots in wood, known as biscuits. These slots are used to join two pieces of wood together, by using a biscuit joiner to create a recess in each piece of wood, and then inserting a biscuit into the slots. The biscuit is then glued to the recesses, and the two pieces of wood are clamped together until the glue dries. Biscuit joiners are available in both corded and cordless versions, and they come in a variety of sizes, depending on the size of the biscuits that you are using.

READ
Is Woodworking Illegal

Biscuit cutters are available in both manual and powered versions. The manual version is operated by hand, while the powered version is operated by a motor. The powered version is more expensive than the manual version, but it is faster and easier to use.

There are a few things to consider when choosing a biscuit cutter. The most important thing to consider is the size of the biscuit cutter. You need to make sure that the biscuit cutter is the same size or smaller than the biscuits that you are using. You also need to consider the type of wood that you will be using. Some woods are harder than others, and will require a tougher biscuit cutter.

When using a biscuit cutter, you need to make sure that the slots are centered on the piece of wood that you are working with. You also need to make sure that the slots are the same size as the biscuits that you are using. If the slots are too big, the biscuits will fall out, and if the slots are too small, the biscuits will not fit in the slots.

Once you have selected the right biscuit cutter for your project, you need to make sure that you are using it correctly. Here are a few tips for using a biscuit cutter:

1. Make sure that the slots are centered on the piece of wood that you are working with.

2. Make sure that the slots are the same size as the biscuits that you are using.

3. Cut the slots with a saw blade that is the same size or smaller than the biscuits that you are using.

4. Cut the slots with a sharp blade to ensure a clean cut.

5. Apply pressure to the cutter while you are cutting to ensure a clean cut.

Custom Woodworking Minneapolis

Woodworking is a craft that has been around for centuries. It is the process of taking raw materials like wood and shaping it into something useful. In the past, woodworking was mostly used for utilitarian purposes, like building furniture or tools. But in recent years, woodworking has become more of a hobby, with people creating all sorts of things, from birdhouses to jewelry boxes.

If you’re interested in woodworking, there are a few things you need to know. The first is that there are a variety of different woodworking techniques, each with its own set of tools and skills required. The second is that not all woods are the same. Each type of wood has its own unique properties, which means that you need to take them into account when crafting something.

The best way to learn woodworking is to find a good instructor. There are a number of different schools and workshops that offer classes in woodworking. Once you have some basic skills, you can start experimenting with different projects. There are a number of different books and online resources that can help you get started.

If you’re looking for a way to get into woodworking, or you’re just looking for a new hobby, custom woodworking might be the right choice for you. It’s a great way to learn a new skill, and it can also be a lot of fun.



Send this to a friend