Working With Wood: What You Should Know

Woodworking is a great way to work with your hands and express your creativity. It’s something that a lot of people enjoy doing because it rewards you with great furniture and other things. Would a few tips and tricks help you get started? Keep reading for some great advice.

Safety must be a priority when doing woodworking. Always purchase the necessary safety equipment to avoid injury. Always keep the tool guards on, since they are there to keep you safe. If you end up hurt, you won’t be able to work at all.

The height of the work bench you use affects the quality of your finished product. You can find it by measuring the how far it is from the floor to your waist. This is the perfect workbench height.



Determine the best wood for your project. Different types of wood can handle different levels of stresses. Some are stronger than others. Practice with wood so you know how it reacts to what you do to it.

Gel stains are great for staining furniture pieces. Stains that are liquid will run when you apply them, but gels tend to stick to lumber. Also, gel stains are thick, so they tend to stain more evenly.

Never use your hand to guide wood through a cut! Using a piece of wood as a guide is much safer. This will keep you from cutting off a finger, which is what you don’t want to happen if you’re wishing to do woodworking again.

You need a stair gauge inside your workshop. These are usually used for laying out stair jacks; however, you can also use it to clamp down your carpenter’s square. It will convert a carpenter’s square into your guide for the circular saw. Using this square will allow you to make cuts that are straight.

Make sure to purchase and wear proper ear protection. Machinery causes a lot of noise, which can damage your ears. Exposing your ears to these things for a long time can cause hearing loss. Use headphones or ear plugs you can throw away. No matter what you choose, be sure that you use them whenever you operate machinery.

Look around for free wood in your area. Some businesses give away their pallets for free provided that you remove them yourself. Prior to dismantling them, though, look online to find ideas for reusing them.

Try finding recycled wood. Scraps can be discarded which are a boon for your projects. Home improvement stores, floor shops and other places frequently discard unused wood. Look for wood that you can use for projects. This can help you save money.

Throwing back a couple of beers when woodworking might seem like a fun thing to do when you’re working. It’s not the best idea, though, to add alcohol to sharp tools. Avoid all woodworking when you are having alcohol. Illegal and prescription drugs should also be avoided when working with woods.

When planning projects, be sure to determine the best wood for it. Refrain from using a soft wood such as pine, as this can become scratched quite easily. Remember that different woods turn different colors when finished.

Safety comes first when using a table saw. When you are crosscutting, be sure to set the length of the cut using a block that is clamped onto the fence. This is safer than just using the fence directly, as it prevents the wood from kicking back. When you use a clamp, the end of the board is still available to be cut.

Whenever you are sanding something, there doesn’t have to be a lot of force applied. Pressure can make the surface uneven. It’s important to learn which sandpaper grit should be used because this will allow you to sand easily without needing to be forceful. Just gently sand in a circular motion.

Stair gauges make excellent circular saw guides. Normally a woodworker uses a stair gauge to ensure each stair has an identical rise. Using both on a carpenter square’s tongue can help guide a circular saw.

You can make sanding blocks on your own. Cut the wood into the shape and size needed for the job. Then you should use an adhesive to get the sandpaper connected to your block and then let it dry. That makes for an ideal sanding block.

Don’t throw out scrap wood, it may prove useful in the future. You never know when you will need a small piece of wood to fill in a small gap or to help clamp together newly glued pieces of wood. Smaller wood pieces also make for good practice cuts.

High quality tools are a worthwhile investment. Low-quality tools are more likely to break, which will be a huge pain in the middle of a project. Tools that are well-made are a worthwhile investment that can last a lifetime. This saves you money as frequent replacement isn’t necessary.

Don’t over purchase when buying wood, tools, hardware or other supplies. When you get too much stuff, you are likely to discover that you don’t actually need it all. Getting things in bulk means more to store at home. A better plan is to purchase what you need for your current project, and know for sure what you will need in the future.

Make sure your blades are shape when you use skills saws and table saws. Many accidents are caused by working with dull blades. Wood can kick back if you use a dull blade. This is one of the more common causes of injuries. Also make sure your drill has bits that are very sharp to get the best result.

When you are chiseling, cut away from your body. You don’t know when you’re going to have the chisel slip up and then hurt the hand you’re using to hold the wood. Do this when using a saw as well; make motions that flow away from yourself for safety.

It’s fun to learn about woodworking. If you turn that learning into practice, you’ll find your projects exceed expectations. Apply what you’ve just learned, and create something great to share with those around you. You could be quite stunned at the final result.

Essential Tips About Working With Wood
Woodworking Information That You Cannot Work Without