Bradford Woodworking

is a professional woodworking and carpentry company that provides high-quality services to clients in the Bradford, Ontario area. We specialize in a wide range of services, from custom carpentry and woodworking to deck building and repairs. We have a team of experienced, qualified professionals who are dedicated to meeting the needs of each and every client.

We understand that every client has different needs, which is why we offer a range of services to choose from. We also understand that not everyone is familiar with the terminology used in the carpentry and woodworking industry, which is why we’ve put together this glossary of terms.

Glossary of Terms

Angle: The angle is the angle at which two lines intersect.



Bevel: A bevel is an angle that is less than 90 degrees.

Board Foot: A board foot is a unit of measurement that is used to measure the volume of lumber. One board foot is equal to 12 inches by 12 inches by 1 inch.

Brad: A brad is a small, thin nail that is used for light-duty applications.

Butt Joint: A butt joint is a type of joint that is used to join two pieces of lumber. The two pieces of lumber are butted together and then glued and nailed.

Chisel: A chisel is a tool that is used for cutting and shaping wood.

Cord: A cord is a unit of measurement that is used to measure the volume of firewood. One cord is equal to 128 cubic feet.

Countersink: A countersink is a tool that is used to create a recessed hole in a piece of wood. This is done so that the head of a screw or bolt can be flush with the surface of the wood.

Crowbar: A crowbar is a tool that is used for prying and moving objects.

Dado: A dado is a groove that is cut into the surface of a piece of wood. This groove is used to receive a piece of lumber that will be glued and nailed in to place.

Dovetail Joint: A dovetail joint is a type of joint that is used to join two pieces of wood. The two pieces of wood are joined by a series of pins and tails. This type of joint is very strong and is often used in furniture making.

Edge Banding: Edge banding is a type of trim that is used to cover the edges of a piece of lumber. This trim is usually made from a different type of wood than the lumber that it is covering.

End Grain: The end grain is the surface of a piece of lumber that is facing the end of the board.

Face Grain: The face grain is the surface of a piece of lumber that is facing the sides of the board.

Featherboard: A featherboard is a tool that is used to hold a workpiece against a fence or other surface while routing or sawing.

File: A file is a tool that is used for shaping and smoothing wood.



Flat Chisel: A flat chisel is a type of chisel that has a flat blade. This type of chisel is used for general purpose cutting and shaping.

Fret Saw: A fret saw is a saw that is used for cutting intricate shapes in to wood.

Gang Saw: A gang saw is a large saw that is used for cutting lumber in to large pieces.

Gouge: A gouge is a tool that is used for shaping and sculpting wood.

Graduated Cylinder: A graduated cylinder is a tool that is used for measuring the volume of liquid. This tool has a series of markings that indicate different volumes.

Hammer: A hammer is a tool that is used for driving nails and other fasteners in to wood.

Hinge: A hinge is a device that is used to connect two surfaces together. Hinges are commonly used on doors and cabinets.

Jigsaw: A jigsaw is a saw that is used for cutting curves and intricate shapes in to wood.

Kerf: The kerf is the width of the cut that is made by a saw blade.

Laminate: Laminate is a type of material that is used for making countertops, cabinets, and other types of furniture. Laminate is made from a thin layer of wood that is glued to a substrate.

Layout Square: A layout square is a tool that is used for marking and measuring angles.

Lumber: Lumber is a term that is used to describe a piece of wood that has been cut in to a specific size and shape.

Marking Gauge: A marking gauge is a tool that is used for transferring measurements from one surface to another.

Miter Joint: A miter joint is a type of joint that is used to join two pieces of wood at a right angle.

READ
How to Remove Dried Paint From Woodwork

Mitre Box: A mitre box is a tool that is used for holding a piece of wood while it is being cut with a miter saw.

Miter Saw: A miter saw is a saw that is used for making miter joints.

Nail Gun: A nail gun is a tool that is used for driving nails in to wood.

Paintbrush: A paintbrush is a brush that is used for painting on paint and other finishes.

Paint Roller: A paint roller is a tool that is used for applying paint and other finishes to a surface.

Plywood: Plywood is a type of lumber that is made from thin sheets of wood that are glued together.

Rasp: A rasp is a tool that is used for shaping and smoothing wood.

Router: A router is a tool that is used for shaping and cutting wood.

Saw Blade: A saw blade is the part of a saw that is used for cutting. Saw blades come in a variety of shapes and sizes.

Saw Horses: Saw horses are a pair of horses that are used for holding a piece of wood while it is being cut with a saw.

Screwdriver: A screwdriver is a tool that is used for turning screws in to wood.

Scroll Saw: A scroll saw is a saw that is used for cutting intricate shapes in to wood.

Sledge Hammer: A sledge hammer is a hammer that is used for pounding nails and other fasteners in to wood.

Speed Square: A speed square is a tool that is used for marking and measuring angles.

Stanley Knife: A Stanley knife is a knife that is used for cutting through thin materials.

Tape Measure: A tape measure is a tool that is used for measuring the distance between two points.

Tenon: A tenon is a projection on the end of a piece of lumber that is used to receive a mortise.

Thin Kerf Saw Blade: A thin kerf saw blade is a saw blade that has a thin blade. This type of saw blade is used for making thin cuts in to wood.

Tongue and Groove: Tongue and groove is a type of joint that is used to join two pieces of wood. The two pieces of wood are joined by a tongue that is inserted in to a groove.

Woodworking Store Charlotte Nc

There are many different reasons to visit a woodworking store. Perhaps you are a novice woodworker and you need to buy your first tool. Or maybe you are looking for a specific tool or piece of equipment and you don’t know where to find it. Maybe you are just looking for some inspiration and you want to see what’s new in the world of woodworking.

No matter what your reason for visiting a woodworking store, there are some things you should keep in mind. First, not all stores are created equal. Some stores are better than others, and some are more expensive than others. It’s important to find a store that fits your needs.

Second, not all woodworking tools and equipment are created equal. You need to do your research and find the right tool for the job. Not all tools are created for beginners, and not all tools are created for experts. It’s important to find the right tool for the job.

Finally, a good woodworking store will offer you a lot of inspiration. You’ll be able to see the latest trends in woodworking, and you’ll be able to get ideas for your next project. A good woodworking store is a great place to learn about woodworking and to get inspired to create new projects.

Steve Ramsey Woodworking

is an online woodworking resource run by woodworker and video blogger Steve Ramsey. Ramsey offers tips and advice for woodworkers of all skill levels, from beginner to expert.

Ramsey’s videos are short and to the point, making them easy to follow. He covers a wide range of topics, from building a simple Adirondack chair to creating a complex piece of furniture. In addition to his video tutorials, Ramsey also offers a blog where he writes about his latest projects, offers advice, and shares tips and tricks.

Ramsey’s blog is a great resource for woodworkers of all skill levels. He offers tips and advice that are easy to follow, and his projects are geared towards beginner and intermediate woodworkers. If you’re looking for a resource that will help you improve your woodworking skills, Ramsey’s blog is a great place to start.

How To Turn Woodworking Hobby Into A Business

Woodworking is a popular hobby that can easily be turned into a business. There are a few things you need to do to get started.

READ
Books On Woodworking Hand Tools

The first step is to decide what you want to make. There are a variety of different projects you can choose from, from small boxes to furniture. Choose a project that you are interested in and that you think you can complete.

The second step is to gather the necessary tools and materials. This will vary depending on the project you choose. You may need a saw, a drill, screws, and other materials. Make sure you have everything you need before you start.

The third step is to start making your project. Follow the instructions carefully and make sure you are careful when using the tools.

The fourth step is to market your business. You can do this by creating a website, setting up a booth at a craft show, or advertising in local newspapers or online.

The fifth step is to start making money. You may need to experiment with different pricing strategies to find what works best for you.

Woodworking is a popular hobby that can easily be turned into a business. There are a few things you need to do to get started.

The first step is to decide what you want to make. There are a variety of different projects you can choose from, from small boxes to furniture. Choose a project that you are interested in and that you think you can complete.

The second step is to gather the necessary tools and materials. This will vary depending on the project you choose. You may need a saw, a drill, screws, and other materials. Make sure you have everything you need before you start.

The third step is to start making your project. Follow the instructions carefully and make sure you are careful when using the tools.

The fourth step is to market your business. You can do this by creating a website, setting up a booth at a craft show, or advertising in local newspapers or online.

The fifth step is to start making money. You may need to experiment with different pricing strategies to find what works best for you.

Diy Picture Frame Woodworking

Picture frames are a popular item to make because they are relatively simple and can be made to fit almost any size picture. In addition, they can be made to match any decor. There are many ways to make a picture frame, but one of the simplest and most popular is to use woodworking.

The first step in making a picture frame with woodworking is to select the wood you will use. The most popular woods for picture frames are oak, pine, and mahogany. However, you can use any type of wood you want.

Once you have selected the wood, you will need to cut it to the correct size. The easiest way to do this is to use a saw. However, if you are not comfortable using a saw, you can always have the wood cut at a lumber yard.

Next, you will need to create the frame. This can be done by using a wooden dowel or a piece of wood that is the same width as the frame. The easiest way to do this is to drill a hole in each corner of the frame and then insert the dowel or piece of wood.

Finally, you will need to attach the picture to the frame. This can be done by using a piece of glass or Plexiglas, or by using a piece of fabric. If you use glass or Plexiglas, you will need to attach it to the frame with some type of adhesive. If you use fabric, you will need to sew it to the frame.

Once the picture frame is complete, you can paint it, stain it, or leave it natural. In addition, you can add any type of embellishments you want, such as a frame, a mat, or a border.

Making a picture frame with woodworking is a simple and easy project that can be completed in a short amount of time. In addition, it is a great project for beginners.



Send this to a friend