Free Blanket Chest Woodworking Plans

Free Blanket Chest Woodworking Plans

A blanket chest is a piece of furniture that is typically used to store blankets. However, there are many other things that can be stored in a blanket chest, including clothing, linens, and other items.

There are many different ways to build a blanket chest. However, the most common design is a simple box with a lid. The lid can be hinged, or it can be attached to the box with magnets or screws.

When building a blanket chest, it is important to use high-quality wood. This will ensure that the chest is strong and durable. The wood can be stained or painted to match the décor of the room.



If you are looking for a simple and easy-to-build blanket chest, the following free woodworking plans may be of interest to you.

Free Blanket Chest Woodworking Plans

This free woodworking plan is for a simple blanket chest that is hinged on the lid.

This free woodworking plan is for a blanket chest that is attached to the wall.

This free woodworking plan is for a blanket chest with a built-in seat.

This free woodworking plan is for a blanket chest with a sliding lid.

This free woodworking plan is for a blanket chest with a divided interior.

This free woodworking plan is for a blanket chest with a decorative front panel.

This free woodworking plan is for a blanket chest with a pull-out tray.

Woodworking Plans Nightstand

A nightstand is a very important piece of furniture in a bedroom. It provides a place to store books, magazines, a lamp, and other bedside necessities. It can also be a decorative piece in the room.

When choosing a nightstand, there are a few things to consider. The first is size. The nightstand should be the right size for the bed and the room. It should be big enough to store what you need, but not too big or bulky that it takes up too much space.

The second thing to consider is style. The nightstand should match the décor of the room. It can be a traditional nightstand with a drawer and a shelf, or it can be a more modern design with a sleek, minimalist look.

The third thing to consider is functionality. The nightstand should have a place to store books, magazines, a lamp, and other bedside necessities. It should also be easy to reach from the bed.

Once you have considered these factors, you can start shopping for a nightstand. There are many different styles and sizes to choose from, so you are sure to find the perfect one for your bedroom.

Tea Box Woodworking Plans



Tea Box

This tea box is constructed from solid wood with a natural finish. The tea box has a hinged lid with a clasp to keep it closed, and a divided interior to hold several tea bags. The tea box is finished with a clear coat of sealant.

This project is suitable for a beginner woodworker. The dimensions of the tea box are 7-1/4 inches wide by 4-3/4 inches deep by 2-1/4 inches high.

The following materials are required to construct the tea box:

-One piece of 1/2-inch-thick plywood, 7-1/4 inches wide by 4-3/4 inches deep
-One piece of 1/4-inch-thick plywood, 7-1/4 inches wide by 2-1/4 inches deep
-One piece of 3/4-inch-thick wood, 7-1/4 inches wide by 2-1/4 inches wide
-One strip of wood, 1/4 inch thick by 1-1/2 inches wide by 7-1/4 inches long
-One piece of wood, 3/4 inch thick by 1-1/2 inches wide by 7-1/4 inches long
-One clasp
-One hinge
-One can of clear sealant

READ
Woodworking Plans Pantry Shelving

Tools Required

-Circular saw
-Power drill
-1/2-inch drill bit
-1/4-inch drill bit
-3/8-inch drill bit
-Paintbrush
-Ruler or tape measure
-Square
-Level
-Clamps
– Hammer
-Screwdriver
-Chisel
-Sander

The first step in constructing the tea box is to cut the pieces of wood to size. The plywood is cut to size with a circular saw. The 1/2-inch-thick plywood is cut to 7-1/4 inches wide by 4-3/4 inches deep, and the 1/4-inch-thick plywood is cut to 7-1/4 inches wide by 2-1/4 inches deep.

The 3/4-inch-thick wood is cut to 7-1/4 inches wide by 2-1/4 inches wide. The 1/4-inch-thick strip of wood is cut to 1-1/2 inches wide by 7-1/4 inches long. The 3/4-inch-thick piece of wood is cut to 1-1/2 inches wide by 7-1/4 inches long.

The next step is to drill the holes for the screws. The holes are drilled with a power drill and a 1/2-inch drill bit. The holes are drilled in the following locations:
-One hole in the center of each piece of plywood
-One hole in the center of each end of the 1/4-inch-thick strip of wood
-One hole in the center of each end of the 3/4-inch-thick piece of wood

The next step is to attach the hinges to the tea box. The hinges are attached with a screwdriver. The hinges are attached in the following locations:
-One hinge on the left side of the tea box
-One hinge on the right side of the tea box

The next step is to attach the clasp to the tea box. The clasp is attached with a screwdriver. The clasp is attached in the following location:
-One clasp on the front of the tea box

The next step is to sand the pieces of wood. The wood is sanded with a sandpaper block. The wood is sanded to a smooth finish.

The next step is to apply a coat of sealant to the tea box. The sealant is applied with a paintbrush. The sealant is applied to the entire surface of the tea box.

The tea box is now complete. The tea box can be used to store tea bags.

Design Woodworking Plans Online

Design Woodworking Plans Online is a blog that is designed to help woodworkers of all skill levels design and build their own woodworking projects. From simple projects like a basic end table to complex projects like a custom built-in bookcase, Design Woodworking Plans Online can help you design and build the perfect woodworking project for your home.

Design Woodworking Plans Online is the perfect resource for woodworkers of all skill levels. Whether you are a beginner just starting out in the world of woodworking, or an experienced woodworker looking to expand your skillset, Design Woodworking Plans Online can help you design and build the perfect woodworking project for your home.

READ
National Woodworking Show

Design Woodworking Plans Online is a constantly growing resource, and we are constantly adding new and exciting woodworking projects to help you design and build the perfect woodworking project for your home. So be sure to check back often, and be sure to bookmark Design Woodworking Plans Online so you can come back and design the perfect woodworking project for your home.

Lego Table Woodworking Plans

This is an easy project that can be completed in a few hours. The table is made from 2x4s and a piece of plywood. The table is 32 inches wide and 24 inches deep. The plans can be modified to make a larger or smaller table.

Tools

Table saw

Miter saw

Drill

Jigsaw

Circular saw

Orbital sander

Materials

2x4s

Plywood

1 inch finish nails

1 1/4 inch finish nails

1 1/2 inch finish nails

Construction adhesive

Cordless drill

1/4 inch drill bit

5/16 inch drill bit

3/8 inch drill bit

1 inch hole saw

1 1/4 inch hole saw

1 1/2 inch hole saw

Clamps

Stapler

Step 1

Cut the pieces for the table top and legs. The table top is made from 2x4s. The legs are also made from 2x4s. The dimensions for the table top are 32 inches wide and 24 inches deep. The dimensions for the legs are 2 inches by 2 inches.

Step 2

Cut the pieces for the frame. The frame is made from 2x4s. The dimensions for the frame are 32 inches wide and 24 inches deep. The frame is notched to fit around the table top and legs.

Step 3

Assemble the frame. The frame is assembled with 1 inch finish nails. The frame is notched to fit around the table top and legs.

Step 4

Cut the piece for the plywood bottom. The plywood bottom is cut to fit inside the frame. The plywood bottom is notched to fit around the table top and legs. The plywood bottom is attached to the frame with construction adhesive and 1 1/4 inch finish nails.

Step 5

Attach the legs to the table top. The legs are attached to the table top with 1 1/2 inch finish nails. The legs are spaced evenly on the table top.

Step 6

Attach the frame to the plywood bottom. The frame is attached to the plywood bottom with construction adhesive and 1 1/4 inch finish nails.

Step 7

Attach the plywood bottom to the legs. The plywood bottom is attached to the legs with construction adhesive and 1 1/4 inch finish nails.

Step 8

Sand the table. The table is sanded with an orbital sander.

Step 9

Apply a finish to the table. A finish is applied to the table with a brush or a rag.







Send this to a friend